Safe-Hete Model 2150SS Portable Immersion Water Heater, 1150W 120V, Stainless Element

Condition: Used; used a few times. Includes original box and original paper manual. No other accessories stated.

Product Description

The Safe-Hete (Electra SafeHete) 2150SS is a compact portable electric immersion water heater designed to quickly warm small volumes of water in buckets, tubs, and trays—especially handy where you need temporary hot/warm water without installing a permanent heater. With a 1150W / 120V heating element (often an Incoloy/stainless-type corrosion-resistant element) and an insulated handle, it’s a practical tool for jobsite cleanup, camping, pet care, and keeping water warm in wet saw trays or utility buckets.

Because this is an immersion-style heater, safe operation depends on proper submersion and supervision: the element must be in water before powering on, and the unit must be unplugged before removing from the water.

Specifications

• Model: 2150SS

• Type: Portable immersion water heater

• Input power: 120 VAC (standard household power)

• Wattage: 1150 W

• Approx heating performance (typical use): can raise small quantities of water temperature quickly (example often cited: ~1 gallon to warm range in ~10 minutes, depending on starting temp and container)

• Element material: corrosion-resistant “Incoloy / stainless” style element (as described)

• Design notes: compact stem (~5.5 in stem commonly referenced) with insulated handle

• Safety design: grounded cord; minimum immersion depth requirement (commonly ~1.5 in minimum immersion)

• UPC/GTIN: Not provided

Features

• Fast heat-up from a standard 120V outlet (1150W)

• Immersion heating—directly heats water in a bucket/container (no plumbing required)

• Corrosion-resistant element (Incoloy/stainless-type) for durability in clean water

• Insulated handle for safer handling when positioned correctly

• Portable form factor for jobsite, camping, and utility use

• Grounded plug/cord to support safer operation on properly grounded outlets

Applications

• Wet tile saw trays: warming water for cutting in colder environments (when appropriate for your saw/workflow)

• Camping / outdoor utility: warm water for washing or cleanup

• Cleaning and wash buckets: warm water for tools, parts, and general cleanup

• Pet care: warming water for bathing (use caution and verify temperature)

• Light-duty shop use: warming water in small tubs for rinsing/cleanup tasks

Spheres of Application

• Construction / tile & stone work

• Maintenance / facilities

• Outdoor/camping utility

• Home garage/shop cleanup

• Light commercial cleaning support

Operating Notes and Safety Reminders

• Always submerge the heating element before plugging in. Never energize in air.

• Use clean water only (avoid chemicals/solvents; they can be hazardous and may damage the unit).

• Unplug before removing the heater from water.

• Avoid contact with the heated element—it can cause severe burns.

• Strongly recommended: use a GFCI-protected outlet (common best practice for portable electric devices around water).

• Never leave heating water unattended, and keep away from children/pets.

• Use only in containers rated for hot water and placed on stable, non-flammable surfaces.

Cross-Referenced Models

(These are common “family/format” references used by buyers; verify exact model/label on your unit.)

• Safe-Hete 2150SS (this unit)

• Safe-Hete 2150 (same watt/voltage family naming sometimes used)

• Electra SafeHete Portable Immersion Heater 1150W/120V (generic family reference)

• Safe-Hete “SS” variants (suffix often indicates stainless/Incoloy-type element)

Comparable Products

• 120V bucket immersion heaters in the ~1000–1500W range (general category equivalents)

• Portable jobsite water warmers for cleaning buckets/tubs

• Low-wattage immersion cup heaters (smaller capacity; slower heating)

• Inline or countertop electric water warmers (less portable; different use case)

Use as Part of a Larger System

This heater is often used alongside:

• 5-gallon utility bucket or small tub (clean water)

• GFCI extension cord (when an outlet isn’t nearby)

• Thermometer (or device to measure water temperature) for temperature-sensitive tasks

• Wet saw tray (where applicable and safe for the equipment)

Related

portable immersion heater, bucket water heater, electric water warming element, jobsite warm water tool, camping water warmer, device to heat water in a bucket, 120V 1150W immersion rod, stainless/Incoloy heating element heater, wet saw water tray heater, utility wash bucket warmer

Common Requests:

1. “Safe-Hete 2150SS 1150W 120V portable immersion water heater with box and manual”

2. “Bucket immersion heater for warm water cleanup on jobsite (120V 1150W)”

3. “Immersion heater safe use steps: submerge first, unplug before removing”

4. “Portable water heater for wet tile saw tray / camping washing bucket”

5. “Replacement portable immersion water heater 120V 1000–1500W stainless element”

Trademarks Disclaimer

Safe-Hete, Electra SafeHete, and any other brand names mentioned are trademarks of their respective owners. References are used only for identification and comparison; no affiliation or endorsement is implied.

P125;B006; GT00112; GT00113