A.O. Smith/Century JF1H126N Motor 9625 1/16 HP 3450 RPM 460-Volt 0.25-Amp Ball Bearing Blower Motor

A.O. Smith / Century JF1H126N Blower Motor – 1/16 HP, 3450 RPM, 460V, 1-Phase, Ball Bearing, Open Drip Proof

Condition: New open box – box is missing; motor shows minor wear due to shelf storage, but has not been previously installed or energized.

This A.O. Smith (also marketed under Century) JF1H126N motor is a fractional horsepower, high-speed blower motor designed for commercial and light industrial HVAC applications. With a 1/16 HP output, it runs at 3450 RPM and is compatible with 460V single-phase systems operating at 50/60 Hz. The motor is ball-bearing equipped for durability and longer lifespan, especially in applications requiring continuous or near-continuous operation. It features an open drip-proof (ODP) design for environments where exposure to moisture is minimal but airflow is required for cooling.

The JF1H126N is ideal for use in ventilation equipment, air curtains, small exhaust fans, and unit heaters where compact size, high speed, and reliable performance are needed. Its capacitor requirement is 4 MFD at 370V, and it is constructed for horizontal mounting, typically with bracket or stud configuration (exact mount type may vary depending on installation setup).

Motor Specifications

• Brand: A.O. Smith / Century
• Model: JF1H126N (Catalog/Part No. 9625)
• Horsepower (HP): 1/16 HP
• Voltage: 460V
• Current Draw: 0.25 Amps
• Frequency: 50/60 Hz
• Speed: 3450 RPM
• Phase: 1‑Phase
• Bearing Type: Ball Bearing
• Mounting Type: Base/Bracket (verify installation style)
• Capacitor Required: 4 MFD / 370V (not included)
• Enclosure: Open Drip Proof (ODP)
• Ambient Rating: Typically 40°C
• Insulation Class: Likely Class B (common for this size motor)
• Motor Shaft Rotation: CCWSE (Counter Clockwise from Shaft End – confirm before installation)

Features

• High-speed design for efficient air movement
• Ball bearings for extended service life in continuous duty cycles
• Compatible with 50 and 60 Hz operation
• Compact, lightweight design for smaller blower housings
• Ideal for retrofit or OEM replacement
• Efficient low-current draw (0.25A)
• ODP enclosure for cost-effective ventilation and cooling

Applications

This motor is commonly used in:

• Blowers and fans in commercial HVAC systems
• Unit heaters and convectors
• Air curtains and door heaters
• Small exhaust fan assemblies
• OEM replacements in packaged HVAC equipment
• Light-duty industrial ventilation units

Cross-Referenced Models

This motor is compatible with or similar to the following models:

• Century 9625
• Magnetek JF1H126N
• AO Smith 9625
• GE 5KCP39FGS171S (1/16 HP, 460V, 3450 RPM, Ball Bearing)
• Emerson K055AXN2938017 (1/16 HP, 460V, 3450 RPM, ODP)

Note: Cross-referenced part numbers should be verified based on application-specific shaft size, mount type, and direction of rotation.

Comparable Products

• Fasco D203 (1/16 HP, 460V, 3450 RPM, ODP, CCWSE)
• US Motors 1855 (1/16 HP, 460V, 1-Ph, Ball Bearing)
• Dayton 4M200 (1/16 HP, 3450 RPM, 460V, Open Ventilation Motor)
• Marathon X433 (1/16 HP, 460V, Single Phase, Ball Bearing)

Compatible Systems & Equipment

While the JF1H126N is a general-purpose blower motor, it’s frequently used in:

• Modine unit heaters
• Reznor overhead heaters
• Berko commercial fan heaters
• Small air handler units in compact rooftop systems
• Door heaters used in retail/commercial entrances

For any of these systems, the motor’s key matching parameters include: 1/16 HP, 3450 RPM, 460V, CCWSE, ODP, and ball bearing construction.

Related

• fractional HP 460V HVAC motor
• 1/16 HP blower motor for commercial ventilation
• small open drip proof replacement motor
• CCWSE fan motor for unit heater
• HVAC motor 3450 RPM single phase

Common Requests:

1. 460V blower motor for commercial air curtain or unit heater
2. A.O. Smith JF1H126N replacement for 9625 high-speed fan motor
3. HVAC fractional HP motor 3450 RPM 1/16 HP ODP
4. 4MFD capacitor motor for 460V HVAC blower fan
5. Low amperage HVAC motor for small ventilation unit

If you need help confirming shaft size, mounting orientation, or rotation for your installation, feel free to provide those details and I’ll refine the match.

Trademark Notice: A.O. Smith® and Century® are registered trademarks of their respective owners. Any use of brand names in this description is for reference purposes only.

NL27