Stryker 272-704-500 “12K” Endoscopic Powered Shaver Handpiece with Integrated Drive Cable, autoclavable reusable resector for arthroscopy/ENT, compatible with Stryker 12K console & footswitch control

Stryker 272-704-500 “12K” Endoscopic Powered Shaver Handpiece with Integrated Drive Cable, autoclavable reusable resector for arthroscopy/ENT, compatible with Stryker 12K console & footswitch control

Condition: Used, tested, working. Clean overall; typical cosmetic wear from prior clinical use. Ships non-sterile. No blades/burrs, console, or footswitch included.

The Stryker 12K Shaver handpiece (REF 272-704-500) is a reusable, autoclavable powered instrument designed for arthroscopic and endoscopic tissue resection and debridement. Mated to a Stryker 12K console (and footswitch), the handpiece drives a family of disposable and reusable shaver blades and burrs to precisely resect cartilage, soft tissue, or bone while maintaining visualization. The included integrated cable provides a keyed, strain-relieved connection to the console for reliable operation in the OR. Its compact form factor, tactile trigger, and rotating sheath interface support controlled work in knee, shoulder, and small-joint procedures, as well as select ENT applications per surgeon preference.

Listing includes the handpiece with attached drive cable only. Requires compatible Stryker 12K console, tubing/irrigation (if used), footswitch, and appropriate shaver blades/burrs (not included). Must be cleaned, inspected, and steam-sterilized per the Stryker IFU prior to clinical use.

Features

• Powered resector/driver for Stryker 12K systems; supports a wide range of shaver blades & burrs

• Integrated console cable with locking connector and strain relief for dependable OR setup

• Ergonomic housing with trigger/actuation designed for precise control and long cases

• Autoclavable construction for repeated reprocessing (follow Stryker IFU cycle parameters)

• High-torque drive suitable for soft-tissue shavers and bone-resecting burrs (model/size dependent)

• Rotating sheath interface (with compatible blades) to orient ports and improve access/evacuation

• Asset identification: engraved Stryker branding and model markings for SPD tracking

Applications / Spheres of Application

• Orthopedic arthroscopy: knee, shoulder, hip, elbow, ankle, wrist—debridement, synovectomy, meniscal/chondral work

• ENT / Sinus surgery (where indicated): resection/debulking with compatible shaver heads

• Sports medicine & ambulatory surgery centers requiring proven powered resection platforms

• Training environments for fundamentals of arthroscopic debridement on legacy Stryker systems

Cross-Referenced / System-Mate Components (Stryker family)

• Stryker 12K Console — power/speed control & footswitch interface

• Stryker 12K Footswitch — on/off and variable control (model dependent)

• Stryker Shaver Blades & Burrs — various diameters/port styles; disposable/reusable (procedure dependent)

• Sterilization trays/inserts — Stryker or third-party trays for transport and steam processing

Always verify your console generation, connector, and blade series for mechanical and drive compatibility.

Comparable Products (similar function, other platforms)

• Arthrex® APS-series / Synergy shavers

• Smith & Nephew Dyonics® Power shavers

• DePuy Mitek® VAPR/Power platforms (mechanical shaver lines)

• ConMed® Linvatec shavers (e.g., Hall/PowerPro)
  (Connector style, blade interface, and console requirements vary—non-interchangeable.)

Integration & System Use

• Setup: Connect the handpiece cable to the Stryker 12K console, attach sterile blade/burr, and route suction/irrigation per blade design.

• Control: Console and footswitch manage on/off and speed. Many blades allow port orientation by rotating the outer sheath.

• Reprocessing: Thorough manual cleaning, inspection of seals/drive hub, and steam sterilization per Stryker IFU. Replace worn O-rings/seals as specified.

• Maintenance: Routine function check—smooth run-up without chatter, proper locking of blades, intact cable jacket and connector pins.

Specifications (typical for the 12K class; confirm per your IFU)

• Model / REF: 272-704-500

• System: Stryker 12K powered shaver platform

• Nominal speed class: up to 12,000 rpm (console-controlled; blade-dependent)

• Handpiece type: Reusable, autoclavable motorized driver with integrated cable

• Compatibility: Stryker 12K console and Stryker-pattern shaver blades/burrs for this platform

• Markings: Stryker Endoscopy branding; model/REF on housing or connector

• UPC/GTIN: Not provided on this unit

What’s Included

• Stryker 272-704-500 12K Shaver Handpiece

• Integrated drive cable (attached)

• Not included: console, footswitch, blades/burrs, tubing, or sterilization tray

Related

Stryker 12K shaver; 272-704-500 arthroscopy handpiece; Stryker Endoscopy powered resector; orthopedic shaver driver; reusable autoclavable shaver; device to resect tissue arthroscopically; legacy Stryker shaver with cable; OR debridement handpiece; arthroscopy debrider

Common Requests:

1. “Is 272-704-500 compatible with my Stryker 12K console and blade set?”

2. “What steam sterilization parameters (temp/time/dry) are approved for this handpiece?”

3. “Does the integrated cable show any cuts or exposed conductors, and do the connector pins test good?”

4. “Which Stryker blade diameters/port styles (full radius, aggressive, burrs) fit this model?”

5. “Can this handpiece be serviced—O-rings, bearings, or cable strain relief—by biomed or must it be factory serviced?”

Manufacturer Trademarks Disclaimer: Stryker and Dyonics are trademarks of their respective owners. Arthrex, ConMed, Linvatec, DePuy, and Mitek are trademarks of their respective owners. Names are used solely for identification and compatibility reference and do not imply endorsement.

P123