Showa SMA 61501F Automatic Cyclic Lubrication Pump, AC 200V Motor, 2L Reservoir SMA6-15

Condition: New in original packaging; box may show shelf-wear/storage marks. Pump and contents unused.

The Showa SMA 61501F is an automatic cyclic lubrication pump designed to deliver measured lubricant to industrial machine lubrication points on a repeating cycle. The SMA platform is widely used because it’s straightforward to integrate, economical to maintain, and flexible across many machine types. Output is adjustable via the pump’s calibrated adjustment mechanism (typically by loosening a set screw and turning the adjustment screw along a calibrated rod), allowing technicians to match lubricant delivery to the machine’s demand.

With an AC 200V drive and a 2-liter reservoir, this unit is well-suited for centralized lubrication on equipment that must run reliably with consistent oil/grease feed to bearings, slides, ways, chains, and other friction surfaces.

Specifications

• Manufacturer: Showa
• Series / Type: SMA automatic cyclic lubrication pump
• Model: 61501F
• Power: AC 200V (application wiring depends on site power and installation standard)
• Reservoir capacity: 2L
• Output control: Adjustable output (calibrated adjustment rod/screw method)
• Reservoir style: Commonly plastic on SMA units; aluminum reservoir variants exist for harsher service (confirm your included reservoir material by appearance/label)
• UPC/GTIN: Not provided

Features

• Automatic cyclic lubrication for repeatable, hands-off lubricant delivery
• Adjustable output setting to tune feed rate to machine requirements
• 2-liter reservoir supports longer run time between refills (duty dependent)
• Designed for centralized lubrication distribution to multiple points
• Common SMA design supports a wide range of cycle times and output configurations (varies by exact build/variant)
• Practical serviceability: refill, output adjustment, and periodic checks are typically simple

Applications

• Machine tools: lathes, mills, grinders, machining centers (ways/slides/bearings)
• Industrial automation: packaging lines, conveyors, pick-and-place machinery
• General manufacturing equipment: presses, textile machinery, printing equipment
• Material handling: chain lubrication, guide rails, bearings (where centralized oiling is used)
• Any multi-point lubrication system where consistent metered delivery improves uptime

Spheres of Application

• Industrial maintenance / MRO
• OEM machine builders and integrators
• Production machining and fabrication
• Light-to-heavy manufacturing plants
• Automation and packaging facilities

Cross-Referenced Models

(Use these as search/compatibility references—final selection should match voltage, reservoir size, output range, and lubricant type.)

• Showa SMA Series (automatic cyclic lubrication pump family)
• Showa SMA variants with different:
  • reservoir materials (plastic vs. aluminum)
  • discharge/output ranges
  • cycle-time configurations
• Showa SMA 2L reservoir configurations (same capacity class as this unit)

If you are looking for a pump with a smaller reservoir, try the Showa SSMA. The Showa SMD Lube pump has most of the same specs of the SMA but offers a protection cover and a different reservoir. If you require a Heavy-Duty Piston pump, look at the Showa YMAS.

SMA 6-15 SMA6151F SMA 615

Comparable Products

(Comparable “automatic cyclic centralized lubrication pumps” used in industrial systems—confirm voltage and metering architecture.)

• Bijur Delimon centralized lubrication pumps (cyclic/oil systems)
• Dropsa automatic lubrication pumps (compact cyclic units)
• SKF Lincoln centralized lubrication pumps (machine lubrication systems)
• Graco automatic lubrication pump packages (industrial lube systems, model dependent)

Use as Part of a Larger System

This pump is typically installed as the “source” in a centralized lubrication assembly:

• Lubrication pump (this unit) → main feed line → distribution manifold → metering units/injectors → individual lube points
  Common supporting components include:
• Metering devices (progressive blocks or injectors, depending on system type)
• Check valves and filters/strainers
• Tubing, fittings, and compression adapters
• Timer/controller or machine PLC output (if the pump is electrically cycled)
• Low-level switch (if equipped) and/or pressure switch for monitoring
• Reservoir fill strainer/cap and correct lubricant specification (oil grade/viscosity)

Notes for Buyers/Installers

• Verify site power matches AC 200V requirements and local electrical standards.
• Confirm lubricant type (oil vs. semi-fluid grease) and viscosity range appropriate for the SMA configuration.
• Confirm the metering method used on your machine (injectors vs. progressive distribution) so output settings align with total system demand.

Related

automatic cyclic lubrication pump, centralized machine lubrication unit, 200V lube pump, 2 liter oil reservoir pump, adjustable output lubrication pump, industrial way oil pump, machine tool lube system pump, metered lubrication supply, automatic equipment oiler, factory automation lubrication pump

Common Requests:

1. “Showa SMA 61501F lubrication pump AC 200V with 2L reservoir new in box”
2. “Automatic cyclic lubrication pump for machine tool ways and bearings 200V”
3. “How to adjust output on Showa SMA pump using set screw and calibrated rod”
4. “Replacement for Showa SMA 2L reservoir pump—match voltage and output range”
5. “Centralized lubrication pump for industrial machines with metering injectors/manifold”

Trademarks Disclaimer

Showa and any other manufacturer names mentioned are trademarks of their respective owners. References are used only for identification and comparison/compatibility purposes; no affiliation or endorsement is implied.

P125; GT00103