GE DINAMAP PRO 400 V2 Vital Signs Monitor, Model DP410M-EN (Item 2018862-001), NIBP/HR with Turbo Temp Port, Desktop Patient Monitor for Spot Checks

GE DINAMAP PRO 400 V2 Vital Signs Monitor, Model DP410M-EN (Item 2018862-001), NIBP/HR with Turbo Temp Port, Desktop Patient Monitor for Spot Checks — Power Cord Included

Condition: Used. Powers up to ready screen with no alarms/alerts shown during basic power test. Turbo Temp probe/sensor that’s plugged in is cracked (see photos) and should be replaced before use. Power cord included. No printer paper and no other cables or accessories are included. Further clinical testing not performed.

The GE DINAMAP PRO 400 V2 is a compact, cart/desk-top vital signs monitor commonly used for spot checks and short-term monitoring in clinics and hospital floors. Unit is labeled DP410M-EN (language: English), item 2018862-001, and includes the front Turbo Temp temperature port. As configured, the platform supports non-invasive blood pressure (NIBP) with heart rate/pulse rate display and Turbo Temp (predictive thermometer). Depending on installed options, some PRO 400 V2 units also support SpO₂ and a strip recorder; this listing does not include SpO₂ sensors and no printer paper is present. The unit powers on; no additional patient-simulator tests were performed.

Faceplate markings: “PRO 400 V2” with Turbo Temp jack; rear sticker: Dinamap DP410M-EN, Item 2018862-001, GE Medical Systems Information Technologies, Inc., assembled in Mexico.

Features

• Vital signs platform for NIBP (systolic/diastolic/mean) with pulse rate display.
• Turbo Temp port for fast predictive temperature (probe present but cracked—replace before use).
• Large, simple display suited for spot-check workflows.
• Soft-key interface for start/stop, interval, and basic configuration.
• AC mains powered; compact footprint for desk or rolling stand.
• Optional features by configuration (not verified/included here): SpO₂ module, thermal recorder.

What’s Included

• GE DINAMAP PRO 400 V2 monitor (Model DP410M-EN, Item 2018862-001)
• AC power cord
• Turbo Temp probe present but cracked/damaged (treat as non-functional; for replacement/parts only)

Not included: NIBP hose/cuffs, SpO₂ sensor/cable (if applicable), printer paper, battery (if model uses one), rolling stand, manuals, or any other accessories.

Typical Specifications (PRO 400 V2 family – for reference)

• Parameters (as configured): NIBP with pulse; Temp via Turbo Temp.
• Power: AC mains; rear IEC inlet (exact rating on rear label).
• Printer: Thermal strip recorder (optional; paper not included here).
• Languages/Region: DP410M-EN = English UI.

(Exact options vary by build; only the items pictured/mentioned are included.)

Applications / Spheres of Use*

• Clinic & Med-Surg spot checks, triage, pre/post-op bays
• Outpatient/urgent care vitals acquisition
• Education/simulation labs for basic monitor training
  *Clinical use requires full incoming inspection and accessories appropriate to your facility.

Cross-Referenced / Related GE DINAMAP Models

• PRO 300 / PRO 400 / PRO 400 V2 / PRO 1000 vital signs monitors
• Carescape V100 (successor class with similar spot-check roles)

Comparable Products

• Welch Allyn Connex / Spot LXi vital signs monitors
• Mindray VS-series spot-check monitors
• Philips SureSigns VS monitors

In Larger Systems / Accessories You May Need

• NIBP hose & cuffs (adult/pediatric sizes, GE-compatible)
• Replacement Turbo Temp probe and probe covers (required; current probe is cracked)
• SpO₂ sensor/cable (if your unit is SpO₂-equipped—verify module before purchasing)
• Thermal printer paper (if using the onboard recorder)
• User/service manual for configuration and performance verification

Trademarks

GE, DINAMAP, and Turbo Temp are trademarks or registered trademarks of their respective owners. All other marks belong to their owners and are used for identification only.

Related

ge dinemap pro 400 v2; dp410m-en 2018862-001; vital signs monitor nibp; turbo temp thermometer port; used patient monitor powers up; device to measure blood pressure and temperature; clinic spot check monitor; hospital floor vitals machine; ge medical systems mexico assembly; no printer paper included

Common Requests:

1. “Does this unit include SpO₂ or is it NIBP/Temp only?”
2. “Can you replace the Turbo Temp probe before shipping?”
3. “What cuffs/hoses are compatible with DP410M-EN?”
4. “Does the recorder work if I add paper?”
5. “Can you provide a biomed check or performance verification report?”

Legal Disclaimer and Terms of Purchase:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on or purchase this item unless you are an authorized purchaser.

Responsibility of Buyer
By purchasing this item, the buyer assumes full responsibility for the purchase, preparation, inspection, testing, calibration, and use of the item, including ensuring compliance with any applicable regulatory requirements. Medical and dental items must be inspected by a qualified biomedical technician before being placed into use. It is solely the buyer’s responsibility to ensure the item’s safety and suitability for its intended purpose.

If this item is intended for use in conjunction with patient care, diagnosis, or any medical application, it is the buyer’s responsibility to obtain the necessary certifications, licenses, or professional clearances required for such use.

Indemnification and Release of Liability
The buyer agrees that the seller shall not be held responsible or liable for any injuries, damages, or losses, whether incidental or consequential, arising from the purchase, preparation, or use of the item. The buyer further agrees to indemnify, defend, and hold the seller harmless from any claims, actions, or demands, including, without limitation, reasonable legal fees, arising from or related to the buyer’s purchase, preparation, or use of the item.

No Warranty
The seller makes no warranties, express or implied, regarding the condition, functionality, or safety of the item, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. The buyer acknowledges that the item is sold “as is” and “with all faults.” The only exception to this is the seller’s 15-day refund guarantee, which applies only to the purchased item and only for 15 days from the shipping date. No other warranties, guarantees, or remedies apply.

Final Agreement
By purchasing this item, the buyer acknowledges and agrees to the terms of this disclaimer, accepting full responsibility for all aspects of the purchase and use of the item.

P124