Genteq/Regal K55HXKPT-9738 PSC Condenser Fan Motor, 1/8 HP, 208–230 VAC TEAO, 48-Frame CCWSE/CWLE 47477-001 41W49

Lennox 41W49, Genteq/Regal K55HXKPT-9738 PSC Condenser Fan Motor, 1/8 HP, 208–230 VAC, ~0.9 A, 1-Speed, TEAO, 48-Frame (belly-band mount), capacitor 5 µF/370 VAC, reversible rotation (factory wired CCWSE/CWLE) 47477-001

Condition: New (open box). OEM carton markings present. Two label sets observed (box + motor). No mounting bracket, blade, or capacitor clamp included unless noted.

A genuine Genteq/Regal (formerly GE) K55 series permanent-split-capacitor (PSC) condenser fan motor intended for residential/light-commercial outdoor condensing units. The K55HXKPT-9738 build is a 1/8 HP, 208–230 V, single-phase motor that draws about 0.9 A and runs with a 5 µF / 370 VAC run capacitor (included here only if specifically stated). Typical of OEM condenser fan applications, it’s a 48-frame, TEAO (Totally Enclosed Air-Over) motor for belly-band mounting, with field-reversible rotation to match the original airflow direction.

Supplied identification (from carton & motor):
Box: “41W49”, “R47477-001”, “Made in Mexico”, “K055KPT9738013J”, Date D18C, UPC 662551387391
Motor label: “K55HXKPT-9738”, HP 1/8, Volt 208–230, PH 1, Pt No 47477-001, Prot Code 7A010, Cap 5 µF 370 VAC

Detailed Description

This PSC condenser fan motor is designed for continuous outdoor duty in air-over conditions (airflow from the condenser fan provides cooling). It is a direct replacement class motor for OEM part numbers shown below and is commonly used in 1- to 3-ton condensing units where a 1/8 HP fan drive is specified. The K55 family corresponds to 48-frame motors; most installs reuse the existing belly-band strap and fan blade. Rotation is typically field-reversible via the two brown (cap) and two line leads per the wiring diagram, allowing you to match CW/CCW shaft direction from the factory unit.

Features

• PSC condenser fan motor, optimized for outdoor condensing units

• 1/8 HP, 208–230 VAC, single-phase, approx. 0.9 A nameplate draw

• Uses a 5 µF / 370 VAC run capacitor (required for operation)

• 48-frame body for belly-band mounting (common OEM mount)

• TEAO enclosure for air-over cooling in condenser airstream

• Reversible rotation (field-selectable) to match existing airflow

• Designed and labeled for continuous duty in HVAC ambient conditions

• Made in Mexico by Regal Beloit/Genteq OEM group

Applications / Spheres of Application

• Residential split-system A/C condenser fan replacement

• Light commercial package units specifying 1/8 HP condenser fans

• Preventive maintenance spares for HVAC service fleets

Cross-Referenced Models (match by specs & label)

• K55HXKPT-9738 (this motor’s engineering model)

• K055KPT9738013J (carton/trace code seen on box)

• 47477-001 / R47477-001 (OEM part number on label/carton)

• 41W49 (carton marking—commonly seen as an OEM stocking/alternate number)

Always verify: HP, Voltage, RPM, Frame/Mount, Shaft size/length, Rotation, Capacitor value before substituting.

Comparable Products (same class, alternate builds)

• Genteq/Regal 1/8 HP 208–230 V PSC condenser fan motors (other K55 variants)

• Packard/MARS 1/8 HP OEM-replacement condenser fan motors (48-frame, PSC)

• Century (A.O. Smith) 1/8 HP 230 V condenser fan motors with 5 µF cap

Motor Specifications (this unit / typical for this build)

• Manufacturer / Line: Genteq / Regal K55 series

• Model: K55HXKPT-9738 (label)

• Horsepower: 1/8 HP

• Voltage: 208–230 VAC, 1-phase, 60 Hz

• Full-Load Amps (FLA): ~0.9 A (per title/marking)

• Capacitor: 5 µF, 370 VAC run capacitor (required)

• Speeds: 1-speed (PSC)

• Nominal RPM: Typically 825 RPM for 1/8 HP condenser fan builds in this family (verify on your nameplate; some OEMs specify 1075 RPM at this HP—confirm before install)

• Frame: 48 / 48Y class (K55 indicates 48-frame family)

• Enclosure: TEAO (Totally Enclosed Air-Over)

• Rotation: Reversible — report as CCWSE/CWLE when factory-wired one way; swap leads per diagram to reverse (confirm wiring tag)

• Mounting: Belly-band strap (reuse existing); pedestal holes not typically provided

• Bearings: Sleeve or ball bearing depending on sub-build (not stated on label; inspect endbells)

• Protection: Prot Code 7A010 (thermal protection scheme per Genteq code)

• Ambient / Duty: Outdoor condenser air-over, continuous duty

• Country of origin: Mexico

• UPC / GTIN: 662551387391

Note on RPM & rotation statement: Because the supplied photos/labels don’t show the exact RPM line, we list the most common pairing for 1/8 HP/5 µF Genteq condenser motors (≈825 RPM) and flag that some OEM builds are 1075 RPM. Please confirm your original motor’s RPM to ensure proper airflow and noise profile. Rotation is field-reversible; factory lead arrangement determines CCWSE/CWLE out of the box.

Installation & System Notes

• Match the capacitor: 5 µF at 370 VAC (or 440 VAC rated replacement is acceptable/upward compatible).

• Airflow matters: An RPM mismatch changes condenser CFM and head pressure—verify RPM before install.

• Blade & hub: Reuse the original fan blade and set the blade depth to the shroud per OEM spec.

• Mounting: Transfer the belly-band from the old motor; ensure the drain slots face down.

• Wiring: Follow the wiring diagram on the motor; reverse rotation only if airflow is incorrect.

Part of Larger Assemblies (examples)

• Outdoor condenser sections of split systems from various OEMs using a 1/8 HP, 230 V PSC fan motor

• Service stock for HVAC contractors to restore condenser fan operation on like-for-like builds

Related

condenser fan motor 1/8 hp; 208–230v PSC motor; K55HXKPT-9738 replacement; R47477-001 OEM motor; 41W49 condenser motor; TEAO 48-frame belly band motor; 5 mfd 370v capacitor motor; device to drive condenser fan blade; reversible CCWSE/CWLE motor; HVAC outdoor unit fan motor

Common Requests:

1. “Is this the same as R47477-001 / 41W49 used in my condenser?”

2. “What RPM is this exact K55HXKPT-9738 build—825 or 1075?”

3. “Which capacitor do I need? (5 µF / 370 VAC)”

4. “Is the rotation reversible and what is it from the shaft end (CCWSE/CWLE)?”

5. “Will it fit my existing belly-band mount and fan blade (48-frame)?”

Manufacturer Trademarks Disclaimer: Genteq®, Regal®, GE® (legacy), Lennox®, and any other brand names or part numbers mentioned (e.g., 41W49) are the property of their respective owners. They are used here strictly for identification and compatibility reference and do not imply affiliation or endorsement.

P110