ITT Engineered Valves Diaphragm Valve .5-F-428-6-TM-963 – ½” Flanged, Corrosion-Resistant Body, Manual Operator, Sanitary or Industrial Process Valve

ITT Engineered Valves Diaphragm Valve .5-F-428-6-TM-963 – ½” Flanged, Corrosion-Resistant Body, Manual Operator, Sanitary or Industrial Process Valve

Condition: Good used condition.
The ITT .5-F-428-6-TM-963 is a ½-inch diaphragm valve designed for precise flow control and shutoff in demanding process environments, including industrial chemical systems, water treatment facilities, and sanitary or pharmaceutical applications. This model belongs to ITT’s renowned Dia-Flo® series – widely respected for ruggedness, easy maintenance, and corrosion-resistant performance.
The valve features a manual handwheel operator and flanged end connections, likely ANSI standard, for secure and leak-free installation into piping systems. Its internal diaphragm acts as a flexible, pressure-responsive barrier between the fluid path and valve actuator, making it an ideal choice in applications where contamination, corrosion, or particulate sensitivity is a concern.
Model numbers like this often correspond to specific material configurations and trim (e.g., PTFE diaphragm, PVDF or stainless body), and the TM-963 suffix may denote special trim or materials—additional verification of material construction is advised for your application.

🔧 Features
Size: ½ inch (0.5″) nominal pipe size
Connection Type: Flanged ends (likely ANSI)
Valve Type: Diaphragm valve (straight or weir type – verify body configuration)
Operation: Manual handwheel
Seal Type: Flexible diaphragm (likely PTFE, EPDM, or rubber depending on trim)
Model Code: .5-F-428-6-TM-963 (each component may define body, trim, diaphragm material)
Body Material: Typically cast iron, stainless steel, or thermoplastics in ITT lines
Corrosion Resistance: Designed for aggressive or clean environments
Maintenance-Friendly: Top-entry design for fast diaphragm replacement

🛠️ Applications
Common industries and uses:
Pharmaceutical and biotech systems (with sanitary diaphragm trim)
Food and beverage processing
Chemical process and dosing systems
Water and wastewater treatment plants
Pulp and paper mills
Semiconductor and ultra-pure applications (when specified)
Clean-in-place (CIP) and steam-in-place (SIP) systems

🔁 Cross-Referenced Models
This model is comparable to:
ITT Dia-Flo 428 Series Valves
Saunders A-Type Diaphragm Valves (½” ANSI flanged)
GF+ Diaphragm Valves Type 514 (with flanged ends)
Burkert 2104 Classic Diaphragm Valve
Gemu 601, 650 Series Diaphragm Valves

🔄 Comparable Products
Saunders HC4 ½” diaphragm valve (manual, flanged)
GF Type 315 Diaphragm Valve (½”, manual)
GEMU 650 ½” Flanged Valve, EPDM/PTFE diaphragm
ITT Dia-Flo G-Series or B-Series ½” NPT or flanged versions
Asahi/America Type 14 diaphragm valve

🧩 Assembly and System Compatibility
The .5-F-428-6-TM-963 valve is often installed in:
Skid-mounted process systems
Inline flow control or shutoff systems
Sanitary loops (when specified with FDA-grade diaphragms)
Compatible with CIP/SIP protocols if diaphragm and body rated accordingly
May be part of modular valve manifolds or multi-valve blocks in high-purity systems

Trademark Disclaimer:
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

🔁 Related
½” diaphragm valve flanged
ITT Dia-Flo process control valve
TM-963 trim diaphragm valve
Corrosion-resistant manual valve
Cleanflow chemical shutoff valve

📈 Common Requests:
“What materials are used in ITT .5-F-428-6-TM-963 valve construction?”
“Can ITT diaphragm valve be used for sanitary applications?”
“How to replace diaphragm in Dia-Flo ½” valve?”
“Used 428 series ITT diaphragm valve specs”
“What does TM-963 mean on ITT valve label?”

All product names, trademarks, and registered trademarks are the property of their respective owners. Use of these names does not imply any affiliation or endorsement.

P115