Emerson K55HXKPT-9738 PSC Condenser Fan Motor, 1/8 HP, 208–230 VAC, Single-Phase, Frame 48Y

$209.00

1 in stock

Emerson K55HXKPT-9738 PSC Condenser Fan Motor, 1/8 HP, 208–230 VAC, Single-Phase, Frame 48Y (air-over continuous duty), Class B insulation, OEM Allied Air Enterprises R47477-001 replacement

Condition: New. Box marked Allied Air Enterprises; motor labeled Emerson. Carton/ID numbers include: Cat No. R47477-001 / 47477 / 000474770010 / L055KPT9738013J / 0 06 62551 25608. Factory packaging may show storage wear; motor unused.

A genuine Emerson (Regal/Genteq family) K55-series permanent split capacitor (PSC) condenser fan motor used in residential and light-commercial outdoor condensing units. This build—K55HXKPT-9738—is a 1/8 HP, 208–230 V, single-phase motor with 48Y frame and air-over, continuous duty design (TEAO style for condenser airflow cooling). It’s specified by Allied Air Enterprises under R47477-001 / 47477 and commonly drops in where an OEM 1/8 HP 230 V Allied/Armstrong/Ducane/Concord** condenser fan motor is called out. Reuse your belly-band mount and fan blade; match nameplate RPM and capacitor value before energizing.

On-motor markings (provided): Emerson Model K55HXKPT-9738, HP 1/8, Volt 208–230, MFG No C07C, INS CL B, air over cont, Frame 48Y.
Carton markings (provided): Allied Air Enterprises, Cat No R47477-001, 47477, 000474770010, L055KPT9738013J, 0 06 62551 25608.

Features

  • PSC condenser fan motor for outdoor units; engineered for air-over continuous duty

  • 1/8 HP, 208–230 VAC, 1-phase; standard HVAC replacement class

  • Frame 48Y cylindrical body for belly-band mounting (reuse existing strap)

  • Class B insulation for typical condenser ambient conditions

  • OEM cross: Allied Air R47477-001 / 47477 (see Cross-Refs)

  • Field-reversible rotation (wire per diagram to match blade airflow)

  • Designed for use with a run capacitor (typical for this model family: 5 µF / 370 VAC—confirm your nameplate)

Applications / Spheres of Application

  • Residential split-system A/C condensers (Allied Air family brands such as Armstrong Air, Ducane, Concord, AirEase, etc.; verify by part list)

  • Light commercial package units calling for 1/8 HP, 208–230 V condenser fans

  • Service stock for HVAC contractors needing an OEM-spec Allied Air swap

Cross-Referenced Models / Numbers

  • Emerson / Genteq engineering: K55HXKPT-9738 (this motor)

  • Allied Air Enterprises OEM: R47477-001, 47477

  • Carton/build codes seen: L055KPT9738013J, 000474770010, barcode 0 06 62551 25608
    (Use model/serial and parts manual to confirm exact compatibility.)

Comparable Products (same class)

  • Genteq/Regal 1/8 HP 208–230 V PSC condenser motors (other K55 variants)

  • Century (A.O. Smith), MARS, Packard 1/8 HP 230 V PSC condenser motors (48-frame)
    (Match HP, voltage, RPM, frame/mount, shaft, rotation, and capacitor.)

Motor Specifications (as labeled / typical for this build)

  • Manufacturer/Brand: Emerson (Regal/Genteq family)

  • Model: K55HXKPT-9738

  • Horsepower: 1/8 HP

  • Voltage: 208–230 VAC, Single-phase, 60 Hz

  • Enclosure/Duty: Air-over, continuous duty (TEAO style; relies on condenser airflow)

  • Insulation Class: B

  • Frame: 48Y (belly-band mount)

  • Rotation: Reversible (report direction as CCWSE/CWLE; set by lead wiring)

  • Run Capacitor: 5 µF / 370 VAC typical for this Emerson build (verify on your motor label)

  • Nameplate Amps / RPM: Not shown on provided markings; K55 1/8 HP outdoor motors are commonly 825 or 1075 RPM and ~0.7–1.0 A. Confirm on your nameplate or OEM spec before install.

  • Country of Origin: Mexico (per Allied/Genteq manufacturing)

Installation Notes (HVAC tech essentials)

  • Match the capacitor value/voltage to the motor nameplate. A 440 VAC-rated cap is acceptable replacement for 370 VAC.

  • Verify RPM against the original motor. RPM mismatch changes condenser CFM and head pressure.

  • Set blade depth & pitch per OEM shroud spec; tighten hub on clean shaft flats.

  • Mounting: Reuse belly-band; orient weep/drain features down; secure leads away from blade.

  • Rotation: Briefly bump run to verify airflow; swap designated leads to reverse if needed (see wiring tag).

Part of Larger Systems

  • Outdoor condensing sections of Allied Air brands (Armstrong Air, Ducane, Concord, Airease, etc.) using OEM R47477-001 motors in the 1/8 HP class.


Related

Emerson K55 condenser fan motor; Allied Air R47477-001 motor; 1/8 HP 230V PSC fan motor; 48Y frame belly-band motor; air-over continuous duty; device to drive condenser fan blade; reversible CCWSE/CWLE; HVAC outdoor unit replacement motor

Common Requests:

  1. “Is K55HXKPT-9738 the correct replacement for R47477-001 / 47477 in my Allied unit?”

  2. “What capacitor value does this motor require? (Typically 5 µF/370 VAC—confirm nameplate.)

  3. “Is the rotation reversible and which way is it from the shaft end?”

  4. “Is this a 48Y frame for a belly-band mount?”

  5. “What is the RPM (825 vs 1075) of this exact sub-build?” (Check your label/OEM book.)


Manufacturer Trademarks Disclaimer: Emerson®, Genteq®, Allied Air Enterprises®, Armstrong Air®, Ducane®, Concord®, and other brand names or part numbers are the property of their respective owners. They are used solely for identification and compatibility reference and do not imply endorsement.

 

P110

Weight 10 lbs
Dimensions 11 × 8 × 8 in
Brand

Emerson

Capacitor

5MFD / 370VAC

Current

0.9 A

Frame Size

48, 48Y

Horse Power (HP)

1/8

Power Phase

Single Phase

Speed

1075 RPM

Voltage

208-230V

Reviews

There are no reviews yet.

Be the first to review “Emerson K55HXKPT-9738 PSC Condenser Fan Motor, 1/8 HP, 208–230 VAC, Single-Phase, Frame 48Y”

You may also like…

Product added!
The product is already in the wishlist!
Removed from Wishlist