ABBAKA Hy-Ex BL-HY-14 1400 CFM Exterior Ventilation Blower 115V 3.3A Variable Speed Roof or Wall Mount Kitchen Range Hood Exhaust Fan

$1,600.00

2 in stock

Condition: Open Box, New/Unused. Original ABBAKA Hy-Ex exterior ventilation blower in its manufacturer’s cardboard packaging with protective foam inserts. The metal blower housing and internal centrifugal fan wheel appear clean and unused in the photographs. Packaging shows warehouse storage wear, creases, scratches, dents, handling marks, and opened flaps. The unit has not been electrically tested or installed. External cover, speed controller, mounting hardware, installation instructions, and other accessories have not been individually verified for completeness. Two (2) units available. Listed price is for ONE (1) blower only, not both units.

Detailed Description

The ABBAKA Hy-Ex BL-HY-14 is a high-performance exterior-mounted ventilation blower designed for residential and professional-style kitchen range hood exhaust systems.

Rated for 1,400 CFM maximum airflow, this remote exhaust ventilator is engineered to remove cooking smoke, heat, airborne grease particles, moisture, and odors through a properly designed ducted ventilation system.

Unlike conventional range hoods with internally mounted blower motors, the Hy-Ex exterior ventilator positions the motor and fan assembly outside the kitchen. This arrangement helps reduce the mechanical noise transmitted into the cooking area while providing powerful exhaust performance.

The blower is designed for installation on a compatible exterior roof or wall and incorporates a motor-driven centrifugal impeller within a weather-resistant metal housing assembly.

Its variable-speed motor control capability allows ventilation output to be adjusted to suit different cooking conditions, from light everyday use to high-output cooking.

The original carton identifies the unit as Model BL-HY-14, rated at 115V AC, 3.3 amperes, 60 Hz, and 1,400 CFM. These ratings correspond to the ABBAKA Hy-Ex 1.4 high-capacity exterior blower family.

Features

  • 1,400 CFM maximum airflow: Designed for high-capacity kitchen exhaust ventilation.

  • Exterior mounting: Remote blower configuration intended for roof or exterior-wall installations.

  • Quiet-operation design: Locates the exhaust motor outside the kitchen to reduce indoor blower noise.

  • Variable-speed motor: Supports adjustable exhaust output with a compatible speed controller.

  • Centrifugal impeller: Motor-driven fan assembly designed to produce airflow through ducted exhaust systems.

  • 115V AC operation: Compatible with properly installed 115/120V, 60 Hz electrical systems.

  • Weather-resistant metal construction: Designed for exterior ventilation applications.

  • Backdraft prevention: Hy-Ex exterior assemblies are designed with a spring-loaded backdraft damper.

  • Permanently lubricated bearings: Manufacturer-designed for low-maintenance motor operation.

  • Automatic thermal protection: Helps protect the motor against overheating.

  • Remote exhaust configuration: Suitable for applications requiring high airflow without an internally mounted range hood blower.

  • Commercial-style kitchen ventilation: Intended for residential luxury kitchens and similar heavy-duty cooking environments.

Specifications

Specification Details
Manufacturer ABBAKA
Product Line Hy-Ex
Model Number BL-HY-14
Related Model Family HYEX-1.4
Product Type Exterior Remote Exhaust Blower
Maximum Airflow 1,400 CFM
Voltage 115V AC
Current 3.3 Amps
Frequency 60 Hz
Phase Single-Phase
Maximum Motor Power 361 Watts (HYEX-1.4 reference)
Speed Control Variable Speed
Fan Technology Centrifugal
Motor Configuration External Rotor
Required Duct Size 10-inch Round
Mounting Location Exterior Roof or Wall
Motor Bearings Permanently Lubricated Sealed Ball Bearings
Thermal Protection Automatic Reset
Housing Material Weather-Resistant Metal
Housing Finish Galvalume-Type Metallic Finish
Included Packaging Original Cardboard Carton with Foam Protection
Barcode Number 711082507
Additional Identification EE1R-115-310-01
Condition Open Box, Unused
Total Available 2
Quantity Per Purchase 1

The HYEX-1.4 family specifications are used where the BL-HY-14 label does not provide individual details. Exact production revision and included accessories have not been independently confirmed.

Motor Specifications and Construction

The ABBAKA Hy-Ex series uses an external-rotor centrifugal motor assembly with the motor positioned within the fan wheel for efficient cooling.

Motor Characteristic Specification
Motor Type External-Rotor Centrifugal Fan Motor
Voltage 115V AC
Frequency 60 Hz
Phase Single-Phase
Maximum Current 3.3A
Maximum Input Power 361W
Speed Control Variable-Speed, Solid-State
Motor Bearings Permanently Lubricated Sealed Ball Bearings
Thermal Protection Automatic Reset Overload
Impeller Type Centrifugal
Motor Mounting Integrated Blower/Impeller Assembly
Enclosure Within Exterior Ventilator Housing
Duty Ventilation Service
Rotation Not Verified
Capacitor Capacitor Shown in Related HYEX Wiring Diagram

Compatible HYEX-1.4 motor specifications: Published ABBAKA literature contains differing horsepower and speed figures. An older specification lists 1/3 HP at 1,660 RPM, while another lists 1/2 HP at 1,400 RPM. Both list 115V, 3.3A, 361W and 1,400 CFM.

Consequently, the exact motor HP and RPM for this BL-HY-14 unit should be verified from its motor nameplate rather than represented as confirmed. Rotation cannot be reliably stated in shaft-end/lead-end notation without additional motor information.

Airflow Performance

The related HYEX-1.4 manufacturer’s performance table shows how airflow decreases as external static pressure increases.

Static Pressure (in. W.G.) Airflow (CFM)
0.0 1,400
0.1 1,355
0.2 1,297
0.3 1,190
0.4 1,097
0.6 1,014
0.8 901
1.0 751
1.2 603
1.4 511

These figures describe published family performance, not a test of the individual unit for sale. Actual installed airflow depends on duct length, elbows, filters, transitions, and system resistance.

Exterior Housing and Installation

The Hy-Ex blower family uses a low-profile housing for installation outside the building.

Published related HYEX dimensions include:

Dimension Manufacturer Reference
Nominal Housing Width 26.5 in.
Nominal Housing Depth 25.6 in.
Main Housing Dimension 22.75 in.
Maximum Profile Height 9 in.
Low Profile Section 7 in.
Required Duct Diameter 10 in.

These dimensions should be verified against the actual BL-HY-14 housing before preparing roof or wall openings.

The installation requires proper weatherproof flashing, adequately sized metal ductwork, suitable electrical grounding, and an approved speed control. The manufacturer’s installation guidance also addresses low-slope roof curbs, exhaust orientation, and backdraft prevention.

Applications

  • Luxury residential kitchens: High-capacity exhaust for professional-style cooking ranges.

  • Custom range hood installations: Remote blower systems connected to custom hood liners.

  • Kitchen remodeling: Replacement or installation of exterior ventilation equipment.

  • Gas and electric cooking ranges: Exhaust ventilation where the range hood and duct system are properly sized.

  • Island range hoods: Remote extraction through a compatible exhaust duct.

  • Wall-mounted kitchen hoods: Exterior-mounted exhaust blower for ducted ventilation systems.

  • Residential ventilation upgrades: Increased exhaust capacity for suitable kitchen installations.

This product is intended for general kitchen ventilation, not hazardous chemical exhaust, explosive atmospheres, or grease-duct systems requiring separately certified commercial equipment.

Compatible Systems and Assemblies

The Hy-Ex exterior blower family is used with appropriately matched ABBAKA kitchen ventilation components, including:

  • ABBAKA XL Professional range hood liners

  • ABBAKA custom architectural kitchen hood assemblies

  • Compatible remote-blower range hood control systems

  • Manufacturer-approved variable-speed controls

  • 10-inch round metal exhaust ducting

  • Appropriate roof or wall mounting assemblies

  • Compatible backdraft dampers, duct transitions, and acoustic silencers

The manufacturer’s literature specifically describes Hy-Ex integration with XL Professional hood liners. Compatibility with a particular liner, hood control, or installation should be verified before purchase.

Cross-Referenced Models

Model Description
BL-HY-14 Identified boxed exterior blower, 1,400 CFM, 115V, 3.3A
HYEX-1.4 Related 1,400 CFM Hy-Ex exterior ventilator
HYEX-1.4K Related 1,400 CFM roof/wall exterior ventilator configuration
HYEX-1.4-MC Related 1,400 CFM metallic-copper-finish model
HYEX-1.0 Related 1,000 CFM, 115V, 2.9A, 8-inch duct model
HYEX-1.0K Related 1,000 CFM exterior ventilator configuration

The 1,000 CFM and 1,400 CFM versions are not direct drop-in replacements because their airflow ratings and duct requirements differ. The BL-HY-14 and HYEX-1.4 share the principal electrical and airflow ratings, but exact revision-level interchangeability has not been confirmed.

Packaging Identification

The pictured original carton displays:

  • Brand: ABBAKA

  • Product: Hy-Ex Exterior Ventilator

  • Model: BL-HY-14

  • Voltage: 115V AC

  • Amperage: 3.3A

  • Frequency: 60 Hz

  • Airflow: 1,400 CFM

  • Motor Control: Variable Speed

  • Barcode Identification: 711082507

  • Additional Code: EE1R-115-310-01

The additional code may be an internal component, inventory, or production identifier. Its precise purpose and any possible date encoding have not been verified.

Quantity and Purchase Information

Two unused, open-box units available. Price is per ONE (1) unit.

Each purchase includes one ABBAKA BL-HY-14 exterior ventilator from the available inventory. The blower is packaged in its original carton with protective packing material.

Original packaging shows storage and handling damage. Minor variations in packaging condition may exist between the two available units.

Related

ABBAKA BL-HY-14, ABBAKA Hy-Ex, HYEX-1.4, HYEX-1.4K, 1400 CFM exterior blower, remote kitchen exhaust fan, roof mount range hood blower, wall mount exhaust ventilator, high-capacity kitchen ventilation, 115V centrifugal blower, 3.3 amp exhaust motor, 10 inch duct blower, variable-speed range hood exhaust, exterior ventilation motor, low-noise remote blower, professional kitchen hood ventilation, Galvalume exhaust housing, residential kitchen exhaust equipment, remote range hood motor assembly.

Common Requests:

  1. ABBAKA Hy-Ex BL-HY-14 1400 CFM exterior roof mount kitchen exhaust blower 115V

  2. ABBAKA HYEX-1.4 high-performance remote range hood ventilation fan 3.3 amp

  3. Open box ABBAKA 1400 CFM variable-speed exterior ventilator for custom kitchen range hood

  4. ABBAKA BL-HY-14 10 inch duct centrifugal blower for residential kitchen exhaust system

  5. Replacement ABBAKA Hy-Ex 1.4 exterior wall or roof mounted range hood exhaust fan assembly

Trademark Disclaimer: ABBAKA, Hy-Ex, and all referenced trademarks and brand names are the property of their respective owners and are used solely for product identification, comparison, and compatibility reference.

Reviews

There are no reviews yet.

Be the first to review “ABBAKA Hy-Ex BL-HY-14 1400 CFM Exterior Ventilation Blower 115V 3.3A Variable Speed Roof or Wall Mount Kitchen Range Hood Exhaust Fan”
Product added!
The product is already in the wishlist!
Removed from Wishlist